导航
搜索
确认
取消

中文版

CANDOR NEWS

Zhongshan Kaiteng Electric Appliance Co., Ltd

Direct focus on product research and development, committed to continuous innovation in technology, focusing on mastering the core technology of refrigeration as the foundation of the enterprise

Homepage
/
News
/
Industry Information
/
Performance, placement and maintenance of thermostatic wine cabinet

Performance, placement and maintenance of thermostatic wine cabinet

(Summary description)
Nowadays, more and more families are collecting red wine. Many people like to put thermostatic wine cabinet in the living room. It can not only decorate the living room, but also store red wine. It is indeed a double benefit. So, how to place thermostatic wine cabinet? First, see if there is enough space in the house. Second, it depends on the structure of the house.

  Please pay attention to the following points when placing thermostatic wine cabinet:

1. Place the thermostatic wine cabinet on a flat and firm road and withdraw the packaging base to reduce vibration and noise. During transportation, the inclination angle shall not exceed 45 °。 2. It should be placed in an area that will not be exposed to direct sunlight and will eliminate heat sources.

3. It should be placed in a place with good natural ventilation, and 10 cm indoor space should be left on the back and around the cabinet.

4. Do not place it in a natural environment that is too cold or even freezing.

5. It should not be placed in the place where damp air, cold air or water splashes. In case of contact, the splashed water and waste should be cleaned immediately with a thin cloth to prevent corrosion and damage to the electrical insulation performance.

6. The height of the supporting point of the constant temperature wine cabinet can be adjusted. The four corners need to be adjusted symmetrically, and the nuts need to be tightened.



Maintenance of constant temperature wine cabinet:

1. Remove and replace the activated carbon filter at the upper vent once every half a year.

2. Remove dust from condenser (metal mesh on the opposite side of the sprinkler cabinet) every 2 years.

3. Please check whether the power plug has been pulled out before moving or cleaning.

4. The layer frame shall be removed and replaced once every one to two years to prevent the deformation of the solid wood board frame under the high environmental humidity and the safety risk caused by the corrosion of people to the wine.

5. Clean it once a year. Before cleaning, please disconnect the power plug and clean it. Then clean the cabinet door with water gently.

6. Do not apply pressure inside and outside the wine cabinet, do not need to put hot equipment and heavy objects on the top cabinet table.

Performance, placement and maintenance of thermostatic wine cabinet

(Summary description)
Nowadays, more and more families are collecting red wine. Many people like to put thermostatic wine cabinet in the living room. It can not only decorate the living room, but also store red wine. It is indeed a double benefit. So, how to place thermostatic wine cabinet? First, see if there is enough space in the house. Second, it depends on the structure of the house.

  Please pay attention to the following points when placing thermostatic wine cabinet:

1. Place the thermostatic wine cabinet on a flat and firm road and withdraw the packaging base to reduce vibration and noise. During transportation, the inclination angle shall not exceed 45 °。 2. It should be placed in an area that will not be exposed to direct sunlight and will eliminate heat sources.

3. It should be placed in a place with good natural ventilation, and 10 cm indoor space should be left on the back and around the cabinet.

4. Do not place it in a natural environment that is too cold or even freezing.

5. It should not be placed in the place where damp air, cold air or water splashes. In case of contact, the splashed water and waste should be cleaned immediately with a thin cloth to prevent corrosion and damage to the electrical insulation performance.

6. The height of the supporting point of the constant temperature wine cabinet can be adjusted. The four corners need to be adjusted symmetrically, and the nuts need to be tightened.



Maintenance of constant temperature wine cabinet:

1. Remove and replace the activated carbon filter at the upper vent once every half a year.

2. Remove dust from condenser (metal mesh on the opposite side of the sprinkler cabinet) every 2 years.

3. Please check whether the power plug has been pulled out before moving or cleaning.

4. The layer frame shall be removed and replaced once every one to two years to prevent the deformation of the solid wood board frame under the high environmental humidity and the safety risk caused by the corrosion of people to the wine.

5. Clean it once a year. Before cleaning, please disconnect the power plug and clean it. Then clean the cabinet door with water gently.

6. Do not apply pressure inside and outside the wine cabinet, do not need to put hot equipment and heavy objects on the top cabinet table.

Information

Nowadays, more and more families are collecting red wine. Many people like to put thermostatic wine cabinet in the living room. It can not only decorate the living room, but also store red wine. It is indeed a double benefit. So, how to place thermostatic wine cabinet? First, see if there is enough space in the house. Second, it depends on the structure of the house.

  Please pay attention to the following points when placing thermostatic wine cabinet:

1. Place the thermostatic wine cabinet on a flat and firm road and withdraw the packaging base to reduce vibration and noise. During transportation, the inclination angle shall not exceed 45 °。 2. It should be placed in an area that will not be exposed to direct sunlight and will eliminate heat sources.

3. It should be placed in a place with good natural ventilation, and 10 cm indoor space should be left on the back and around the cabinet.

4. Do not place it in a natural environment that is too cold or even freezing.

5. It should not be placed in the place where damp air, cold air or water splashes. In case of contact, the splashed water and waste should be cleaned immediately with a thin cloth to prevent corrosion and damage to the electrical insulation performance.

6. The height of the supporting point of the constant temperature wine cabinet can be adjusted. The four corners need to be adjusted symmetrically, and the nuts need to be tightened.

恒温酒柜

Maintenance of constant temperature wine cabinet:

1. Remove and replace the activated carbon filter at the upper vent once every half a year.

2. Remove dust from condenser (metal mesh on the opposite side of the sprinkler cabinet) every 2 years.

3. Please check whether the power plug has been pulled out before moving or cleaning.

4. The layer frame shall be removed and replaced once every one to two years to prevent the deformation of the solid wood board frame under the high environmental humidity and the safety risk caused by the corrosion of people to the wine.

5. Clean it once a year. Before cleaning, please disconnect the power plug and clean it. Then clean the cabinet door with water gently.

6. Do not apply pressure inside and outside the wine cabinet, do not need to put hot equipment and heavy objects on the top cabinet table.

Keyword:

Scan the QR code to read on your phone

Previous: How to choose thermostatic wine cabinet correctly?
Next: Temperature and working principle of constant temperature wine cabinet
Previous: How to choose thermostatic wine cabinet correctly?
Next: Temperature and working principle of constant temperature wine cabinet

Related News

How to clean the red wine cabinet at home 2019-11-27 00:04:00
With the increase of the use time of the red wine cabinet, like the refrigerator at home, there will be some sundries. People who love to clean can't resist a little flaw and will clean up 1. Do not use organic solvents, boiling water, washing powder or acid to clean the wine cabinet. Do not damage the refrigeration circuit. 2. For safety, please pull out the power plug before cleaning. Mainly to prevent leakage, safety first 3. Do not wash the wine cabinet with water during cleaning; Do not use hard brush or steel wire to clean the wine cabinet. 4. When cleaning the wine cabinet, you need to use a soft cloth or sponge, dipped in water or soap (non corrosive neutral detergent can be used). Wipe clean with dry cloth after cleaning to prevent rust If you still don't know much about this, you can call our company's service hotline 0760-23978287, and we will answer patiently one-on-one Please indicate that the article is from Zhongshan Kaiteng Electric Appliance Co., Ltd http://www.gdcandor.com
What should consumers pay attention to when they choose to buy red wine cabinet 2019-11-26 23:52:00
With the improvement of living standards, China is gradually stepping into a well-off society. More and more people are slowly enjoying life. A good meal and coming home from work in the evening are inseparable from the embellishment of red wine. Red wine is no longer synonymous with westerners. Red wine is not easy to store. If you want to keep the original taste, you need a good red wine cabinet to store it, Kaiteng electric teaches you how to choose to buy wine cabinet 1. The compressor is the heart of the wine cabinet. Whether a red wine cabinet is good or not, the quality of the compressor accounts for a considerable factor. When purchasing a red wine cabinet, the first key point to refer to is whether the compressor is quiet enough, and whether the material of the cabinet is stable enough. The compressor that can ensure ultra quiet operation is the most basic element of a good red wine cabinet. 2. Wine cabinet is divided into two categories: compressor wine cabinet and semiconductor wine cabinet, in which the compressor wine cabinet can be divided into direct cooling and air cooling. Compressor wine cabinet and semiconductor wine cabinet have different characteristics, different refrigeration methods lead to different refrigeration effect. The temperature range of compressor refrigeration is larger than that of semiconductor refrigeration. Generally, the temperature range of compressor wine cabinet is 5 ~ 22 ℃, while that of semiconductor refrigeration is 12 ~ 22 ℃; The wine cabinet of compressor is less affected by the ambient temperature, and can be used normally even in high temperature and cold regions; The semiconductor wine cabinet is greatly affected by the ambient temperature (the internal temperature can only be 8-10 lower than the ambient temperature) °)。 Although not directly sunlight, but ultraviolet rays are ubiquitous, and will destroy the quality of alcohol, is the ultraviolet light in the light. Generally speaking, closed doors with complete light transmittance are the best design for completely isolating ultraviolet rays. However, the general red wine collectors do not see their own collection, always feel like there is nothing less, so the glass door design of the wine cabinet, generally welcomed. And also glass door, have the function of filtering ultraviolet rays, and the cost of ordinary glass is much worse, so before buying, it is better to ask clearly. 3. When the wine cabinet is just opened, the temperature drop time should be phased rather than falling in a straight line like a refrigerator. A good wine cabinet, its temperature control system can take 24 to 48 hours, slowly adjust the temperature to the required temperature, even the most sensitive wine, can not detect the change of surrounding temperature. Generally, the average price of the wine cabinet, may in an hour, 30 ℃ in summer to 18 ℃, as we all know, rapid temperature changes, whether from heat to cold or from cold to hot, is not good for red wine. 4. Humidity control is also a good wine cabinet should have the elements, because humidity will affect cork, humidity is not enough, will let cork dry or wet rot, impact on red wine. The suitable storage humidity of red wine is between 65% and 75%, while the average humidity in the box is 55% for the wine cabinet without humidity control function. It is easy to dry the cork plug.    Kaiteng Electric Co., Ltd   With a strong technical reserve, the company has more than 50 people of technology research and development team. At present, our company has designed and developed more than 70 different wine cabinet products, and has more than 80 patent projects, and the rich product line fully meets each segment of the consumer market. Since its establishment, the company has successively won the honorary titles of Guangdong high-tech enterprises, Zhongshan engineering technology research and development center, Zhongshan municipal enterprise technology center, Guangdong famous brand products and other honorary titles Please indicate that the article is from Zhongshan Kaiteng Electric Appliance Co., Ltd   http://www.gdcandor.com  
Wine cabinet_ Points for attention of constant temperature wine cabinet customization 2021-03-19 10:32:00
Wine cabinet_ Constant temperature wine cabinet customization can not only better store wine, but also add a scenery to the home. Wine cabinet_ The constant temperature wine cabinet is customized according to the cellar planning and design of each different requirement, which is really a good choice. It can be designed and made according to different decoration styles. Therefore, if you want to have a good wine cabinet works, you need to pay attention to some wine cabinet details. Here is a brief introduction to the red wine cabinet_ What are the points for attention of constant temperature wine cabinet customization? Wine cabinet_ Precautions for constant temperature wine cabinet Customization: 1、 Functional choice Custom red wine cabinet_ The constant temperature wine cabinet can be selected according to personal needs, and the size, height and number of partitions required for the constant temperature wine cabinet can be designed according to the quantity, type, texture, characteristics and other factors of the wine. There is also the environmental impact of constant temperature, humidity, shock, ventilation, etc. can be selected according to the actual situation. 2、 Practicability Wine cabinet_ Thermostatic wine cabinet is used to provide convenience, not to look good and ignore its practicality. When customizing, we should consider how to design the thermostatic wine cabinet to meet the needs of families, so that we can use it more comfortably and for a longer time. 3、 Design scheme Because of the wine cabinet_ There is a design scheme with route in the constant temperature wine cabinet, which needs to be planned in advance. Therefore, in the new decoration of the wine cabinet customization, need to have engineering drawings, detailed decoration and production plan, not only can avoid the problems after the completion of the specific decoration, but also can be modified according to the design scheme on the engineering drawings. This can be more intuitive to see the decorative effect of constant temperature wine cabinet. 4、 Raw materials Wine cabinet_ The use of unqualified raw materials should be avoided in constant temperature wine cabinet. At present, there are many decorative materials in the market, and there are also many fake decorative materials. At this time, when customizing the constant temperature wine cabinet, you need to choose carefully. If the quality of raw materials is not good, it will affect the quality of the constant temperature wine cabinet in the future.  

Feedback

Online Service

QQ

QQ Service

Tel

0760-23978287

Wechat

Scan
QR Code

TOP