导航
搜索
确认
取消

中文版

CANDOR NEWS

Zhongshan Kaiteng Electric Appliance Co., Ltd

Direct focus on product research and development, committed to continuous innovation in technology, focusing on mastering the core technology of refrigeration as the foundation of the enterprise

Homepage
/
News
/
Industry Information
/
Red wine cabinet manufacturer: precautions for using sample retention cabinet

Red wine cabinet manufacturer: precautions for using sample retention cabinet

(Summary description)The sample retention cabinet is specially designed to store all kinds of precious test samples.

The representativeness, validity and integrity of samples will directly affect the accuracy of test results. Therefore, effective control must be carried out in all aspects of sample sampling, retention, identification and sample disposal to ensure the accuracy, reliability and science of test results. And do a good job in the confidentiality and security of samples. Red wine cabinet manufacturer

   Precautions for using sample retention cabinet:

  （ 1) Insert the thermometer into the socket (in the middle of the ventilation regulator at the top of the box).

  （ 2) Plug the power plug into the power socket.

  （ 3) Turn the starting point of the glow wire set to position 1 or 2 (depending on the required temperature). At this time, the blower can be turned on to promote the convection of hot air. At the beginning, the red indicator light will be on when the heating wire group is turned on. Red wine cabinet manufacturer

  （ 4) Pay attention to the thermometer. When the temperature of the thermometer is about to reach the required temperature, please adjust the automatic temperature control knob so that the green indicator light will be on. After ten minutes, observe the thermometer and indicator light. If the temperature on the thermometer exceeds the required temperature and the red indicator is still on, turn the automatic temperature control knob counterclockwise until the temperature is constant at the required temperature until the indicator turns red and green. The thermostat knob is on the top left in front of the box. Its dial can not be used as a standard temperature indicator, but only as an adjustment mark.

  （ 5) In the process of constant temperature, if three groups of heating wires are not needed to heat at the same time, only one group of heating wires can be opened. The more open the group was, the faster the temperature rose.

  （ 6) After working for a period of time, you can open the top exhaust regulator to drain water, you can also open the blower.

  （ 7) After use, turn off all the heat wire group switches, and turn the knob of the automatic thermostat to zero in a counter clockwise direction.

  （ 8) Pull off the power plug.

新闻

红酒柜厂家：使用样品留样柜的注意事项

红酒柜厂家：使用样品留样柜的注意事项

新闻

Red wine cabinet manufacturer: precautions for using sample retention cabinet

(Summary description)The sample retention cabinet is specially designed to store all kinds of precious test samples.

The representativeness, validity and integrity of samples will directly affect the accuracy of test results. Therefore, effective control must be carried out in all aspects of sample sampling, retention, identification and sample disposal to ensure the accuracy, reliability and science of test results. And do a good job in the confidentiality and security of samples. Red wine cabinet manufacturer

   Precautions for using sample retention cabinet:

  （ 1) Insert the thermometer into the socket (in the middle of the ventilation regulator at the top of the box).

  （ 2) Plug the power plug into the power socket.

  （ 3) Turn the starting point of the glow wire set to position 1 or 2 (depending on the required temperature). At this time, the blower can be turned on to promote the convection of hot air. At the beginning, the red indicator light will be on when the heating wire group is turned on. Red wine cabinet manufacturer

  （ 4) Pay attention to the thermometer. When the temperature of the thermometer is about to reach the required temperature, please adjust the automatic temperature control knob so that the green indicator light will be on. After ten minutes, observe the thermometer and indicator light. If the temperature on the thermometer exceeds the required temperature and the red indicator is still on, turn the automatic temperature control knob counterclockwise until the temperature is constant at the required temperature until the indicator turns red and green. The thermostat knob is on the top left in front of the box. Its dial can not be used as a standard temperature indicator, but only as an adjustment mark.

  （ 5) In the process of constant temperature, if three groups of heating wires are not needed to heat at the same time, only one group of heating wires can be opened. The more open the group was, the faster the temperature rose.

  （ 6) After working for a period of time, you can open the top exhaust regulator to drain water, you can also open the blower.

  （ 7) After use, turn off all the heat wire group switches, and turn the knob of the automatic thermostat to zero in a counter clockwise direction.

  （ 8) Pull off the power plug.

Information

The sample retention cabinet is specially designed to store all kinds of precious test samples.

The representativeness, validity and integrity of samples will directly affect the accuracy of test results. Therefore, effective control must be carried out in all aspects of sample sampling, retention, identification and sample disposal to ensure the accuracy, reliability and science of test results. And do a good job in the confidentiality and security of samples. Red wine cabinet manufacturer

   Precautions for using sample retention cabinet:

  （ 1) Insert the thermometer into the socket (in the middle of the ventilation regulator at the top of the box).

  （ 2) Plug the power plug into the power socket.

  （ 3) Turn the starting point of the glow wire set to position 1 or 2 (depending on the required temperature). At this time, the blower can be turned on to promote the convection of hot air. At the beginning, the red indicator light will be on when the heating wire group is turned on. Red wine cabinet manufacturer

  （ 4) Pay attention to the thermometer. When the temperature of the thermometer is about to reach the required temperature, please adjust the automatic temperature control knob so that the green indicator light will be on. After ten minutes, observe the thermometer and indicator light. If the temperature on the thermometer exceeds the required temperature and the red indicator is still on, turn the automatic temperature control knob counterclockwise until the temperature is constant at the required temperature until the indicator turns red and green. The thermostat knob is on the top left in front of the box. Its dial can not be used as a standard temperature indicator, but only as an adjustment mark.

  （ 5) In the process of constant temperature, if three groups of heating wires are not needed to heat at the same time, only one group of heating wires can be opened. The more open the group was, the faster the temperature rose.

  （ 6) After working for a period of time, you can open the top exhaust regulator to drain water, you can also open the blower.

  （ 7) After use, turn off all the heat wire group switches, and turn the knob of the automatic thermostat to zero in a counter clockwise direction.

  （ 8) Pull off the power plug.

Keyword:

Scan the QR code to read on your phone

Previous: Red wine cabinet manufacturer: functions of embedded red wine cabinet
Next: Embedded wine cabinet manufacturers: how to choose electronic thermostatic wine cabinet
Previous: Red wine cabinet manufacturer: functions of embedded red wine cabinet
Next: Embedded wine cabinet manufacturers: how to choose electronic thermostatic wine cabinet

Related News

How to clean the red wine cabinet at home 2019-11-27 00:04:00
With the increase of the use time of the red wine cabinet, like the refrigerator at home, there will be some sundries. People who love to clean can't resist a little flaw and will clean up 1. Do not use organic solvents, boiling water, washing powder or acid to clean the wine cabinet. Do not damage the refrigeration circuit. 2. For safety, please pull out the power plug before cleaning. Mainly to prevent leakage, safety first 3. Do not wash the wine cabinet with water during cleaning; Do not use hard brush or steel wire to clean the wine cabinet. 4. When cleaning the wine cabinet, you need to use a soft cloth or sponge, dipped in water or soap (non corrosive neutral detergent can be used). Wipe clean with dry cloth after cleaning to prevent rust If you still don't know much about this, you can call our company's service hotline 0760-23978287, and we will answer patiently one-on-one Please indicate that the article is from Zhongshan Kaiteng Electric Appliance Co., Ltd http://www.gdcandor.com
What should consumers pay attention to when they choose to buy red wine cabinet 2019-11-26 23:52:00
With the improvement of living standards, China is gradually stepping into a well-off society. More and more people are slowly enjoying life. A good meal and coming home from work in the evening are inseparable from the embellishment of red wine. Red wine is no longer synonymous with westerners. Red wine is not easy to store. If you want to keep the original taste, you need a good red wine cabinet to store it, Kaiteng electric teaches you how to choose to buy wine cabinet 1. The compressor is the heart of the wine cabinet. Whether a red wine cabinet is good or not, the quality of the compressor accounts for a considerable factor. When purchasing a red wine cabinet, the first key point to refer to is whether the compressor is quiet enough, and whether the material of the cabinet is stable enough. The compressor that can ensure ultra quiet operation is the most basic element of a good red wine cabinet. 2. Wine cabinet is divided into two categories: compressor wine cabinet and semiconductor wine cabinet, in which the compressor wine cabinet can be divided into direct cooling and air cooling. Compressor wine cabinet and semiconductor wine cabinet have different characteristics, different refrigeration methods lead to different refrigeration effect. The temperature range of compressor refrigeration is larger than that of semiconductor refrigeration. Generally, the temperature range of compressor wine cabinet is 5 ~ 22 ℃, while that of semiconductor refrigeration is 12 ~ 22 ℃; The wine cabinet of compressor is less affected by the ambient temperature, and can be used normally even in high temperature and cold regions; The semiconductor wine cabinet is greatly affected by the ambient temperature (the internal temperature can only be 8-10 lower than the ambient temperature) °)。 Although not directly sunlight, but ultraviolet rays are ubiquitous, and will destroy the quality of alcohol, is the ultraviolet light in the light. Generally speaking, closed doors with complete light transmittance are the best design for completely isolating ultraviolet rays. However, the general red wine collectors do not see their own collection, always feel like there is nothing less, so the glass door design of the wine cabinet, generally welcomed. And also glass door, have the function of filtering ultraviolet rays, and the cost of ordinary glass is much worse, so before buying, it is better to ask clearly. 3. When the wine cabinet is just opened, the temperature drop time should be phased rather than falling in a straight line like a refrigerator. A good wine cabinet, its temperature control system can take 24 to 48 hours, slowly adjust the temperature to the required temperature, even the most sensitive wine, can not detect the change of surrounding temperature. Generally, the average price of the wine cabinet, may in an hour, 30 ℃ in summer to 18 ℃, as we all know, rapid temperature changes, whether from heat to cold or from cold to hot, is not good for red wine. 4. Humidity control is also a good wine cabinet should have the elements, because humidity will affect cork, humidity is not enough, will let cork dry or wet rot, impact on red wine. The suitable storage humidity of red wine is between 65% and 75%, while the average humidity in the box is 55% for the wine cabinet without humidity control function. It is easy to dry the cork plug.    Kaiteng Electric Co., Ltd   With a strong technical reserve, the company has more than 50 people of technology research and development team. At present, our company has designed and developed more than 70 different wine cabinet products, and has more than 80 patent projects, and the rich product line fully meets each segment of the consumer market. Since its establishment, the company has successively won the honorary titles of Guangdong high-tech enterprises, Zhongshan engineering technology research and development center, Zhongshan municipal enterprise technology center, Guangdong famous brand products and other honorary titles Please indicate that the article is from Zhongshan Kaiteng Electric Appliance Co., Ltd   http://www.gdcandor.com  
Wine cabinet_ Points for attention of constant temperature wine cabinet customization 2021-03-19 10:32:00
Wine cabinet_ Constant temperature wine cabinet customization can not only better store wine, but also add a scenery to the home. Wine cabinet_ The constant temperature wine cabinet is customized according to the cellar planning and design of each different requirement, which is really a good choice. It can be designed and made according to different decoration styles. Therefore, if you want to have a good wine cabinet works, you need to pay attention to some wine cabinet details. Here is a brief introduction to the red wine cabinet_ What are the points for attention of constant temperature wine cabinet customization? Wine cabinet_ Precautions for constant temperature wine cabinet Customization: 1、 Functional choice Custom red wine cabinet_ The constant temperature wine cabinet can be selected according to personal needs, and the size, height and number of partitions required for the constant temperature wine cabinet can be designed according to the quantity, type, texture, characteristics and other factors of the wine. There is also the environmental impact of constant temperature, humidity, shock, ventilation, etc. can be selected according to the actual situation. 2、 Practicability Wine cabinet_ Thermostatic wine cabinet is used to provide convenience, not to look good and ignore its practicality. When customizing, we should consider how to design the thermostatic wine cabinet to meet the needs of families, so that we can use it more comfortably and for a longer time. 3、 Design scheme Because of the wine cabinet_ There is a design scheme with route in the constant temperature wine cabinet, which needs to be planned in advance. Therefore, in the new decoration of the wine cabinet customization, need to have engineering drawings, detailed decoration and production plan, not only can avoid the problems after the completion of the specific decoration, but also can be modified according to the design scheme on the engineering drawings. This can be more intuitive to see the decorative effect of constant temperature wine cabinet. 4、 Raw materials Wine cabinet_ The use of unqualified raw materials should be avoided in constant temperature wine cabinet. At present, there are many decorative materials in the market, and there are also many fake decorative materials. At this time, when customizing the constant temperature wine cabinet, you need to choose carefully. If the quality of raw materials is not good, it will affect the quality of the constant temperature wine cabinet in the future.  

Feedback

Online Service

QQ

QQ Service

Tel

0760-23978287

Wechat

Scan
QR Code

TOP