• Categories:Industry Information
• Author:
• Origin:
• Time of issue:2020-12-30 15:11
• Views:

(Summary description)Under normal operation, ice bar can be cleaned once in 2-4 months. If there is no large amount of frost in the ice bar, it can be cleaned once in 3-6. If there is a lot of frost in the ice bar, it is very inconvenient to use it. It should be cleaned immediately. There is no time for clearing the ice bar. It depends on the frost condition of the ice bar. Of course, if there is something stored in the ice bar every day, it is recommended to clean it regularly.

Precautions for ice bar cleaning and maintenance:

1. Before cleaning, cut off the power supply and take out the contents of the ice bar;

2. Take out the shelf and bottle frame in the refrigerated room, and wipe the accessories with a cloth dipped in water mixed with detergent. After finishing, wipe it dry with a rag or put it in a dry and ventilated place, so that it can be dried naturally;

3. Let ice bar natural frost, pad some towels under, prevent frost water from wet floor. If you want to quickly de ice, you can blow the ice with the electric blower after unplugging the power supply, and let it loose and fall off;

4. Clean the ice bar shell and door body first, wipe the shell and handle with a soft cloth. If there are more stains, you can dip in the spot cleaning detergent to wipe it;

5. Dip the soft cloth with water or detergent, gently wipe the cold storage tank, and then dip in the water to wipe the detergent away;

6. Wipe the ice inside the bar with a towel after melting. Do not use sharp objects to shovel ice on evaporator plate, so as to avoid damaging evaporator, causing ice bar failure. After cleaning, open the door and dry naturally;

7. After the ice bar refrigerates the inner tank, clean the door. The door seals are removable. Do not pull the door seals savagely when removing them, so as to avoid the door seal being pulled out. The door seal is wiped with 1:1 vinegar water, and the cleaning effect is also good;

8. Clean the ventilation grid on the back of the ice bar with a soft brush, and wipe it with a dry soft cloth or towel;

9. After cleaning, plug in the power supply and check whether the temperature controller is set in the correct position. Under normal operation, ice bar can be cleaned once in 2-4 months. If there is no large amount of frost in the ice bar, it can be cleaned once in 3-6. If there is a lot of frost in the ice bar, it is very inconvenient to use it. It should be cleaned immediately. There is no time for clearing the ice bar. It depends on the frost condition of the ice bar. Of course, if there is something stored in the ice bar every day, it is recommended to clean it regularly.

Precautions for ice bar cleaning and maintenance:

1. Before cleaning, cut off the power supply and take out the contents of the ice bar;

2. Take out the shelf and bottle frame in the refrigerated room, and wipe the accessories with a cloth dipped in water mixed with detergent. After finishing, wipe it dry with a rag or put it in a dry and ventilated place, so that it can be dried naturally;

3. Let ice bar natural frost, pad some towels under, prevent frost water from wet floor. If you want to quickly de ice, you can blow the ice with the electric blower after unplugging the power supply, and let it loose and fall off;

4. Clean the ice bar shell and door body first, wipe the shell and handle with a soft cloth. If there are more stains, you can dip in the spot cleaning detergent to wipe it;

5. Dip the soft cloth with water or detergent, gently wipe the cold storage tank, and then dip in the water to wipe the detergent away;

6. Wipe the ice inside the bar with a towel after melting. Do not use sharp objects to shovel ice on evaporator plate, so as to avoid damaging evaporator, causing ice bar failure. After cleaning, open the door and dry naturally;

7. After the ice bar refrigerates the inner tank, clean the door. The door seals are removable. Do not pull the door seals savagely when removing them, so as to avoid the door seal being pulled out. The door seal is wiped with 1:1 vinegar water, and the cleaning effect is also good;

8. Clean the ventilation grid on the back of the ice bar with a soft brush, and wipe it with a dry soft cloth or towel;

9. After cleaning, plug in the power supply and check whether the temperature controller is set in the correct position.